New OEM genuine Nissan steel mesh screen for the crankcase vent on "L" series engines. This screen installs...
Rubber hole plug for Datsun 240Z, 260Z, 280Z and 510 floor pans. Fits hole size of 1" (25mm)....
New OEM or stainless fender bolt.  This bolt can be used in many places but is a nice...
New OEM Genuine Nissan harmonic balancer bolt for the crankshaft. This crank bolt will fit 1970-83 Datsun 240Z,...
Datsun 240Z, 260Z, 280Z, 280ZX and 510 chromoly pressure plate bolt. New ARP racing high strength clutch cover...
$6.89
New condensor for Datsun 240Z and 510, 1968-73 with manual transmission and single point distributor.
New shift knob in cherry wood with glossy or satin finish. Modeled after the original in size and...
New OEM Genuine Nissan front strut rod bushing components. This bushing set will fit 1970-83 Datsun 240Z, 260Z,...
New factory style electric fuel pump for Datsun 240Z and 260Z, 1970-74. This fuel pump is for cars...
Valve spring compressor tool for removing valve springs on "L" series Nissan OHC engines. Will work on 4...
New reproduction Datsun 510 license plate light rubber gaskets. Will fit 1968-73 510 sedan or wagon option. Choose...
$12.99
Timing cover gasket set. Will fit Datsun "L" series engines 4-cyl and 6-cyl, 1968-1983.  
 These brake lines are 3/16" with 10mm metric fittings which will work with your Datsun metric fittings.  These...
New front input shaft oil seal for 4 and 5-Speed manual transmission. Fits 1970-1989 Datsun 240Z 260Z 280Z...
One New axle (1/2 shaft) U-Joint for 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX and 510. On the Datsun...
New OEM genuine Nissan rear outer axle lock nut. This nut will fit Datsun 240Z, 260Z, 280Z, 280ZX...
New OEM genuine Nissan rear wheel lug stud. This wheel stud will fit 1970-83 Datsun 240Z, 260Z, 280Z, ...
Datsun vintage logo key fob. Metal construction with red/white/blue enamel. Double sided logo 1.25" diameter.
New set of ARP flywheel bolts for 1970-78 Datsun 240Z, 260Z, 280Z, 280ZX and 510. Includes 6-bolts with...
New OEM Nissan engine block to transmission dowel pin. This part will fit Datsun 240Z, 260Z, 280Z and...
New door hinge repair kit for Datsun 240Z (260Z/280Z) and 510.  We have kits for early and late...
New fuel sending unit for Datsun 510 sedan 1968-73.  If your fuel gauge is not working or not...
Five pack of fuses for Datsun 240Z, 260Z, and 280Z, 1970-78. The 10 and 20 amp are the...
New/Reman Alternator for Datsun 240Z, 260Z , 280Z and 510, 1970-77.  Stock replacement, 60 amp. This alternator is...
New clutch release (throwout) bearing for 1970-83 Datsun 240Z, 260Z, 280Z, and 280ZX.   Choose from Koyo/NSK-Japan or other...
Sale
Valve Rocker Arm 240Z 260Z 280Z 280ZX 510
$19.99$14.99
New cylinder head valve rocker arm for 1970-83 Datsun 240Z, 260Z, 280Z, 280ZX and 510.   Will fit all...
New radiator drain plug with gasket. This drain plug will fit Datsun 240Z, 260Z, 280Z, and 280ZX, 1970-83....
New harmonic balancer for Datsun L series engines 4 and 6 cylinder 1968-83. Stock replacement performance balancer.  This...
$9.89
New OEM Genuine Nissan clutch fork rubber boot for Datsun 240Z, 1970 to August 1971 and 510 68-73....
$24.50
New trunk rubber seal for Datsun 510 1968-79.   Will fit 2 and 4 door sedans.
New shift knob made out of walnut.  Modeled after the original in size and shape.   Available in satin...
Axle seal for the R180 and R160 rear differenital. This seal is for each stub axle coming out...
$1.59
Oil pump gasket for "L" series engines 1968-83. Will fit Datsun 240z, 260Z, 280Z, 280ZX and 510.  *See...
New OEM Genuine Nissan front oil seal for Datsun 240Z, 260Z, 280Z, 280ZX adn 510 1968-83. This seal...
New mounting bolt for the slave cylinder to the transmission on Datsun 240Z, 260Z, 280Z, 280ZX and 510. ...
New crankshaft bolt washer. This is an extra thick washer that will not bend when installing the balancer....
$249.00
New Universal 18-Circuit Wiring Harness.  There are no stock replacement wiring harness solutions at this time for the 1970'S...
Custom wrench for the gland nut on the strut assembly found on Datsun 240Z, 260z and 280Z. This...
New OEM Genuine Nissan ignition ballast for Datsun 240Z, 1970-1973. This resistor is for use with an ignition...
New weld on wiring holders for Datsun 240Z, 260Z, 280Z and 510.  These steel tabs are modeled after...
Sale
Gas Door Fuel Lid Rubber Stop 510
$7.00$6.49
New OEM genuine Nissan fuel door rubber stop for Datsun 510, 68-73.
New Wix oil filter for Datsun "L" series engines 1968-1983.  Available in standard and racing.  These are high...
New OEM Genuine Nissan roller pilot bearing. This clutch pilot bearing will fit Datsun 240,Z 260Z, 280Z, 280ZX...
Custom wheel spacer that will fit the front of 1970-83 Z cars.  Most aftermarket spacers will not clear...
These are the original style wiring connectors as used on Datsun 240Z, 260Z, 280Z and 510 1968-78.  Choose...
Stainless steel JIS hex head bolts with captured washers like originals in quantities of 10.  Restore your vintage...
New OEM thermostat housing gasket for 2-bolt housing. Will fit Datsun 240Z, 260Z, 280Z, 280ZX and 510 *SeePT#...
New OEM genuine Nissan oil pressure relief bypass valve. This valve will fit Datsun 240Z, 260Z, 280Z and...
$58.99
New voltage regulator for Datsun 240Z, years 1970 to 8/1973 and 510 68-73. Has 6-prong rectangular electrical plug....
New reproduction clutch or brake pedal pad. This rubber pad will fit Datsun 240Z, 260Z, 280Z, 280ZX and...
New OEM rubber hole plug for the front frame in the engine bay on Datsun 510 1968-73.  These...
New rear differential front pinion seal. This seal will fit Datsun cars with R180 and R160 rear differential....
$31.99
New ignition/starter switch for Datsun 240Z, 260Z and 280Z, 1971-78 and 510 71-73. This has a 5-pin connector. ...
Transparent stickers for windows, tool boxes, or wherever.  Each sticker is about 2.5" tall.  Choose from 4 different...
Linkage connector socket for Datsun carburetor/fuel injection and accelerator linkage.  Differs in looks from the originals but functions...
New Energy Suspension black polyurethane sway bar bushings for 1970-83 Datsun 240Z, 260Z, 280Z & 280ZX. Will fit...
New OEM Genuine Nissan rubber hood bumper for Datsun 510, 68-73.   Choose from hollow or solid style.  Hollow...
New OEM Genuine Nissan cylinder head bolt washer for 1968-83 Datsun 240Z, 260Z, 280Z, 280ZX and 510. Will...
New OEM Genuine Nissan clutch pilot bushing for Datsun 240Z, 260Z, 280Z, 280ZX and 510 1968-83. This bushing...
Front oil seal for the engine crankshaft. This seal install in the front timing cover and seals the...
New Pertronix Ignitor electronic igniton conversion kit. Replaces points.   Choose from 510 (4-cylinder) or 240Z (6-cylinder). *Not for...
New OEM oil drain plug seal for Datsun Z cars.  This crush washer fits the oil pan drain...
New OEM plastic door rod clip for Datsun cars and trucks. This clip retains the rods under the...
New grade 8 seat belt bolt and washers. High grade plated bolt and washers that will fit all...
$8.89

Part #: 200-553

$6.89

Part #: 800-928

$49.99

Part #: 800-1231

$89.99

Part #: 800-1735

$12.99

Part #: 800-714

$29.99

Part #: 800-147

$10.89

Part #: 200-931

$8.99

Part #: 800-572

$66.00

Part #: 800-116

Sale
$19.99$14.99

Part #: 800-566

$9.89

Part #: 200-440

$24.50

Part #: 300-049

$8.50

Part #: 800-912

$1.59

Part #: 800-1142

$14.59

Part #: 200-715

$1.39

Part #: 800-1486

$249.00

Part #: 800-2018

$21.99

Part #: 200-592

Sale
$7.00$6.49

Part #: 200-910

$21.99

Part #: 200-753

$8.69

Part #: 200-492

$7.99

Part #: 200-888

$58.99

Part #: 800-043

$4.99

Part #: 800-1539

$14.50

Part #: 800-007

$31.99

Part #: 800-034

$2.69

Part #: 200-590

$10.49

Part #: 200-557

$7.69

Part #: 800-650

$4.49

Part #: 200-1038

Showing: 65 -128 of 671
Spinner